LED Tristar Master
The exciting new Tri-star contains the latest in colour changing LED technology. You can expect many years of reliable, maintenance free coloured light from this quality unit. Designed to fit into any 50mm MR16 down light housing, wall light, spike light, or ground light. The master and slave system offers the added benefit of being able to control many units at same time, at the touch of a button.
Tristar Master
Colour change MR16 master unit
5watts Output
1.2meters 4-core 0.75 cable
Control up to 32 LED Tristar slaves units from one Remote Control
Requires 24v DC LED driver
NOTE Max length between Power supply and last light = 50metres
Power Supplies
Input PDC 200/24 Will power 1 Master and 32 Slaves
Input PDC/100/24v DC will power 1 Master and 9 slaves OR 10 slaves
Input PDC/20/24v DC Will power 1 Master and 3 Slaves OR 4 Slaves
Note: You cannot connect 2 masters on the same circuit
Note: the RED = PLUS, BLACK = MINUS are wired in parallel and are the only wires connected to the power supplies. the GREEN & WHITE are DATA cables are wired in parallel and are not connected to power supplies.
Note: With regard to the PDC 200/24 when using MAX. Quantity, your customer may experience a couple of the lights out of synch. Or they might not be able to control the master unit from the remote control. If this is the case, advise your customer to switch off power supply from mains for at least 30 seconds. Then switch power supply back on, the Tri-Star should then operate in synch.
|
